Australian Standard Pallet (1165x1165)

Australia

The national standard pallet size in Australia, part of the ISO 6780 standard set, distinct from the CHEP-issued Euro and US sizes also used there.

Footprint1,165 x 1,165 mm45.9 x 45.9 in
Pallet height150 mm5.9 in
Typical max load1,500 kg3,307 lb
Typical max stack height2,000 mm78.7 in

Example load

With a reference 400 x 300 x 300mm, 10kg case, an Australian Standard Pallet (1165x1165) fits 8 cases per layer and 6 layers high, for 48 cases per pallet at 480kg total — stopped by its 2,000mm stacking height limit. That works out to 70.7% footprint utilization. Use the calculator below with your own box dimensions for an exact count.

48 reference cases (400x300x300mm) loaded on an Australian Standard Pallet (1165x1165)

Calculate your own load

Boxes per layer (Ti)–
Layers high (Hi)–
Boxes per pallet–
Limited by–
Pallet weight–
Footprint utilization–
Volume utilization–
CBM per pallet–

Australian Standard Pallet (1165x1165) in a container or trailer

Frequently asked questions

What are the exact dimensions of an Australian Standard Pallet (1165x1165)?

An Australian Standard Pallet (1165x1165) measures 1,165 x 1,165 mm (45.9 x 45.9 in) at the footprint, with a pallet height of 150mm (5.9in).

How much weight can an Australian Standard Pallet (1165x1165) hold?

A typical Australian Standard Pallet (1165x1165) is rated for around 1,500kg (3,307lb) of dynamic load, though the exact rating depends on the pallet's construction and condition — always check the manufacturer's rating for load-bearing applications.

How tall can a load on an Australian Standard Pallet (1165x1165) be stacked?

Most warehouses and carriers cap stacked loads on an Australian Standard Pallet (1165x1165) at around 2,000mm total height, though this varies by transport mode — check the specific container or trailer page for its interior height limit.